7 Best Replacement Motors for Adjustable Beds (October 2026)
The best replacement motors for adjustable beds include the Generic RICHMAT Massage Motor Replacement Adjustable Bed for compatible Richmat massage motors, the Fruhdi Power Recliner Mulin Motor Actuator Model for matching Mulin ML16 systems, and the Okin Motor Model JLDQ-12 & JLDQ.12.134.329Q for a 329 mm OKIN actuator match.
On this page (6 sections)
- Which replacement motor for an adjustable bed fits your setup?
- How should you match an adjustable bed motor replacement?
- Is the motor actually the cause of the problem?
- How can you install a replacement actuator safely?
- Does a replacement motor change mattress compatibility?
- Which adjustable bed motor should you choose?
The best replacement motor for an adjustable bed is one that matches the original motor’s model, plugs, mounting points and travel. The RICHMAT HJM2 is the most direct option here for compatible massage motors, while the actuator picks suit only systems with matching labels and dimensions.
A replacement is not a universal part. Adjustable beds use different motors for lifting sections and running massage functions, and two motors can look alike while using different plugs or travel lengths.
This roundup compares 7 options using their stated model numbers, connector types and dimensions. The scores reflect how clearly each option fits a defined replacement need and how much fit information is available.
Our score weighs specs and features against what you’re shopping for.
Our picks at a glance
-
1
Best for compatible Richmat massage motorsGeneric RICHMAT Massage Motor Replacement Adjustable Bed
9.7/10 our score
See it on Amazon -
2
Best for matching Mulin ML16 systemsFruhdi Power Recliner Mulin Motor Actuator Model
9.6/10 our score
See it on Amazon -
3
Best for a 329 mm OKIN actuator matchOkin Motor Model JLDQ-12 & JLDQ.12.134.329Q
9.3/10 our score
See it on Amazon
- 4
Check itFruhdi Recliner Lift Chairs Limoss 450312 Motor
Best for matching Limoss 450312 assemblies - 5
Check itFeikeer 1.28.000.131.30 Electric Recliner Actuator Replacement Kit
Best for a complete 24 V actuator kit - 6
Check itOkin Betadrive Motor Model D.77390 for Power
Best for a 204 mm OKIN single-motor match - 7
Check itKroshine Power Recliner Motor Replacement KDPT007-115
Best for a 29 V actuator with 226 mm travel
Which replacement motor for an adjustable bed fits your setup?
The RICHMAT HJM2 is the clearest fit for a compatible Richmat head or foot massage motor; actuator replacements need a closer match to the old unit. Start by identifying whether you need a massage motor or an actuator that moves a frame section.
Generic RICHMAT Massage Motor Replacement Adjustable Bed: Best for compatible Richmat massage motors
- RICHMAT HJM2 model
- Can replace head or foot massage motors
- 2-pin round power connector
The HJM2 can replace either a head or foot massage motor on compatible adjustable beds. Confirm the motor model and control-box port, since it does not fit a white connector.
Pros
- Interchangeable for head or foot massage positions
- Compatible with other Richmat massage motors
Cons
- Requires a 2-pin round port
- Not compatible with a white connector
The Generic RICHMAT HJM2 is designed for adjustable beds that use Richmat massage motors. Its interchangeable design can replace either the head or foot massage motor, which makes it useful when the failed part is one of those units.
The key fit check is the 2-pin round power connector. The HJM2 is not for a control box with a white connector, so inspect the port and compare it with the motor you are removing.
This is a massage motor, not a general replacement for a lifting actuator. If the head or foot section will not rise, first identify the motor attached to that movement and its model label.
Choose it when your existing Richmat massage motor is an HJM2 or another compatible Richmat model, and the port matches. Avoid choosing it based on the bed brand alone.
Fruhdi Power Recliner Mulin Motor Actuator Model: Best for matching Mulin ML16 systems
- Replaces Mulin ML16-246 and ML16-246A
- 187 mm stroke
- 2-pin power and 5-pin hand-control connections
This actuator is a possible match for systems using Mulin ML16-246 or ML16-246A. Check the label, connector shapes, stroke and installation length before choosing it.
Pros
- Specific replacement model numbers
- Stroke and minimum installation dimension are stated
Cons
- Model match is essential
- The included hand-control and power plugs must fit
Fruhdi’s Mulin ML16-246 actuator is aimed at beds or lift chairs that use the ML16-246 or ML16-246A motor. Its stated 187 mm stroke and 385 mm minimum installation dimension give you two measurements to compare with the old actuator.
It uses a 2-pin flat round power connection and a 5-pin hand-control plug. Confirm both plug shapes and the motor label, since a matching number of pins does not guarantee the connector will fit.
The actuator may also suit some Catnapper power recliner models, but that does not make it a universal adjustable-bed motor. Check the frame’s mounting points and the full travel range before considering it.
Okin Motor Model JLDQ-12 & JLDQ.12.134.329Q: Best for a 329 mm OKIN actuator match
- Suggested for OKIN JLDQ.12.134.329Q and related models
- 329 mm stroke
- 5-pin hand control and 2-pin power connectors
This OKIN motor names several compatible JLDQ models and provides stroke and installation dimensions for comparison. Match the exact plugs and frame requirements before ordering.
Pros
- Multiple JLDQ model numbers are named
- Stroke and install dimensions are specified
Cons
- Not suitable for frames with different travel or plug needs
- The switch and power supply should be checked first
The OKIN JLDQ motor is the most measurement-specific actuator in this group, with a 329 mm stroke, 134 mm minimum installation size and 463 mm maximum size. The named model is JLDQ.12.134.329Q, with several related JLDQ numbers also identified as possible replacements.
Its connector set includes a 5-pin hand-control plug, a 2-pin square power plug and a 2-pin socket for a slaved motor. Match the exact connection arrangement on your existing setup rather than assuming every JLDQ motor uses the same wiring.
Before replacing it, check whether the switch or power supply is responsible for the failure. The motor should be a model and frame match, not a guess based on the bed’s brand.
Fruhdi Recliner Lift Chairs Limoss 450312 Motor: Best for matching Limoss 450312 assemblies
- Limoss part number 450312
- 307 mm stroke
- Includes switch, power supply and AC cable
This kit is specified for Limoss 450312 and includes a switch, power supply and AC cable. Confirm the old motor label and the frame’s connection and dimension needs.
Pros
- Part number and model are identified
- Switch and power components are included
Cons
- Only fits a matching motor setup
- Check the label before ordering
Fruhdi’s Limoss 450312 kit is a candidate when the old motor label says 450312 or MD140-02-L1-157-307. It has a 307 mm stroke and 157 mm minimum installation dimension, plus a switch, power supply and AC cable.
The included parts make this option different from a motor-only replacement. Before choosing the kit, confirm that the original frame uses the same Limoss motor family and that the mounting points and connectors match.
The stated maximum load is 3,000 N for push and pull. That number does not confirm fit by itself; installation length and stroke still have to match the frame.
Feikeer 1.28.000.131.30 Electric Recliner Actuator Replacement Kit: Best for a complete 24 V actuator kit
- DC 24 V actuator
- 8.27 in stroke
- Power adapter, extension cable and hand controller included
This actuator kit includes a power adapter, extension cable, hand controller and mounting pins. Compare its minimum length, stroke and bracket hole size with your current setup.
Pros
- Several connection and mounting parts are included
- Voltage, stroke and bracket hole size are stated
Cons
- Not identified as a match for every adjustable-bed frame
- Length and bracket fit need confirmation
Feikeer’s 1.28.000.131.30 kit includes an actuator, power adapter, 2.5 m extension cable, hand controller, pins and pin shafts. It specifies DC 24 V, an 8.27 in stroke, a 15.31 in minimum installation size and 0.385 in bracket holes.
Those details make the bracket and travel checks especially important. Measure the current actuator between its mounting points and confirm the frame’s pin holes fit before buying.
The kit is described for several furniture and lift applications, including medical beds, but that broad use does not identify a specific adjustable-bed model match. Compare the voltage and connectors as well as the dimensions.
Okin Betadrive Motor Model D.77390 for Power: Best for a 204 mm OKIN single-motor match
- Suggested for OKIN D.77390 and related JLDQ models
- 204 mm stroke
- 2-pin power and 5-pin hand-control connections
The Betadrive motor is intended for specific OKIN single-motor models. Compare its model numbers, connector arrangement and travel dimensions with the motor you are replacing.
Pros
- Related OKIN models are named
- Minimum and maximum dimensions are stated
Cons
- Does not fit every actuator frame
- Switch and power supply should be ruled out first
The OKIN Betadrive D.77390 is a possible replacement for specific OKIN single-motor models, including JLDQ.1.156.204 and JLDQ.11.156.204. Its 204 mm stroke, 157 mm minimum dimension and 361 mm maximum dimension help narrow the fit.
It uses a 5-pin hand-control plug and a 2-pin power connector. Compare the plug positions and mounting arrangement with your existing motor, since the same pin count can appear on different connector shapes.
This motor is a narrower match than the longer-travel JLDQ option above. Pick it only when the old model and frame dimensions align, and check the switch and power supply before treating the actuator as the cause.
Kroshine Power Recliner Motor Replacement KDPT007-115: Best for a 29 V actuator with 226 mm travel
- KDPT007-115 linear actuator
- DC 29 V input
- 226 mm stroke
This actuator specifies its input voltage, travel, speed and load, which helps when comparing a matching motor. Check the old unit’s model, connectors and mounting dimensions first.
Pros
- Voltage and travel are stated
- Power and hand-control connector types are described
Cons
- Model and frame compatibility still need confirmation
- The switch and power supply may be the cause of a failure
Kroshine’s KDPT007-115 actuator specifies a DC 29 V input, 226 mm stroke and 150 mm minimum installation dimension. It also gives a speed of 24 mm/s and a maximum load of 1,500 N.
Its connector details include a 2-pin flat round power transformer connection and a 5-pin hand-control connection. Match these with the old motor, and check the frame’s mounting points and full installation length before ordering.
This option is for buyers who can identify the KDPT007-115 model and confirm the electrical and mechanical fit. It is not a safe choice based only on a bed having a similar actuator shape.
How should you match an adjustable bed motor replacement?
Match the brand and model first, then verify every connector and dimension that affects the frame. The right replacement motor should fit the electrical system and the physical mounting space without forcing the bed’s movement.
What should you read on the motor label?
Write down the motor brand, model and part number before unplugging anything. Labels such as HJM2, ML16-246, JLDQ.12.134.329Q, 450312, 1.28.000.131.30, D.77390 and KDPT007-115 point to different replacement families.
A label match is a strong starting point, but still compare the plugs and measurements. Some motor families have related model numbers, while a frame may require a particular stroke and minimum install dimension.
Which motor connectors do you need to compare?
Compare the connector shape, pin count and purpose for each plug. A 2-pin round connector, 2-pin square connector and 2-pin flat round connection are not interchangeable just because each has two pins.
Also note separate power and hand-control connections, along with any socket for a second motor. The RICHMAT HJM2 specifically requires a 2-pin round control-box port and does not fit a white connector.
How do mounting points and travel affect fit?
Check the mounting holes or pins, the distance between the attachment points when retracted, and the actuator’s full stroke. The new motor’s minimum and maximum installation dimensions should fit the frame through its full movement.
A longer stroke can push the bed beyond its intended range, while a shorter one may not raise a section as far. If you cannot safely measure the mechanism, use the old motor’s exact model to find the correct dimensions.
Is the motor actually the cause of the problem?
A bed that does not move may have a power supply, remote, switch, cable or control-box problem instead of a failed motor. Check that the unit has power and that plugs are seated before you buy a replacement actuator.
Look for loose or damaged cords and inspect the connectors with the power disconnected. If a control or power supply is the source, replacing the motor alone will not restore movement.
Learn how adjustable bases are powered to understand where power enters the system. For a closer look at the motor’s role, see what an adjustable bed motor does.
If the actuator itself needs replacement, make a note of how it attaches to the frame before removing it. The guide to how adjustable bed motors move the frame explains why travel and attachment points matter.
How can you install a replacement actuator safely?
Follow the bed maker’s instructions and disconnect power before handling plugs or moving parts. Support the frame so it cannot drop or shift while you work near the actuator.
Take a clear photo of the old motor’s connections and mounting points before unplugging it. If a replacement requires a different connector, mounting position or wiring change, stop and confirm compatibility with the bed maker or a qualified repair professional.
Keep power cords clear of moving joints after the repair. Our guide to hiding adjustable bed cords covers routing cords so they stay away from the frame’s travel path.
Does a replacement motor change mattress compatibility?
A motor replacement usually concerns the base’s movement system, while mattress fit depends on the mattress and adjustable frame. Before changing how you use the bed, check the frame and mattress guidance for bending and weight limits.
If you are also replacing a mattress, read whether adjustable beds need special mattresses for the main compatibility checks. A replacement actuator does not by itself make an unsuitable mattress a good match.
Which adjustable bed motor should you choose?
Choose the RICHMAT HJM2 for a compatible Richmat massage motor with the required round port. Choose an actuator only when its model, plugs, mounting points and travel match the original motor and frame.
For a labeled Mulin, OKIN, Limoss, Feikeer or Kroshine setup, use the matching measurements above as a checklist and rule out the switch or power supply first. When the model or frame fit is uncertain, confirm the correct replacement with the bed maker before ordering.
Our top 3 picks at a glance
-
1
Best for compatible Richmat massage motors
Generic RICHMAT Massage Motor Replacement Adjustable Bed
9.7/10 our score
See it on Amazon -
2
Best for matching Mulin ML16 systems
Fruhdi Power Recliner Mulin Motor Actuator Model
9.6/10 our score
See it on Amazon -
3
Best for a 329 mm OKIN actuator match
Okin Motor Model JLDQ-12 & JLDQ.12.134.329Q
9.3/10 our score
See it on Amazon
Frequently asked questions
How do I find the right replacement motor for an adjustable bed?
Read the old motor’s brand and model label, then compare its power and hand-control plugs, mounting points, minimum and maximum length, and stroke with the replacement. A motor that looks similar can still fail to fit if one connection or travel measurement differs.
Check the control box and remote too, since they can cause motion problems.
Can I use a recliner motor in an adjustable bed?
Only if the motor’s model, voltage, connectors, mounting points and travel all match the bed’s requirements. A recliner actuator may share a connector style with a bed motor while having different travel or installation dimensions.
Compare measurements and model labels before buying.
How do I measure adjustable bed motor travel?
Stroke is the distance the actuator moves between its retracted and extended positions. Compare the replacement’s stated stroke with the old motor, and check the minimum and maximum installation dimensions as separate measurements.
Also compare mounting points and the connector layout, since travel alone does not confirm fit.
Should I replace the motor if one part of the bed stops moving?
Check the power supply, remote, cables and control connections before replacing a motor. A loose plug or failed control can stop movement even when the actuator is still working.
If those checks do not identify the problem, compare the motor label and connections before selecting a replacement.
Can I install an adjustable bed motor myself?
Some replacement motors use plug connections, but installation still depends on the bed’s frame and the manufacturer’s instructions. Disconnect power before inspecting cables or working near moving parts, and support the frame so it cannot shift unexpectedly.
Get help if you cannot safely reach the motor or identify its connections.
